Swift Gate and Garage Door Services specialises in the supply, installation, programming and repair of automatic gate keypads, wireless keypads and electric gate pushbuttons throughout metropolitan Melbourne and the Mornington Peninsula.
We install gate control accessories for residential and commercial automatic sliding and swing gates, including compatible wired keypads, wireless PIN keypads, push-to-open buttons and remote activation devices.
Whether you need a new keypad for your driveway gate, a replacement for an existing faulty unit or a pushbutton to operate your gate, we can recommend and install a suitable solution.
An automatic gate keypad allows authorised users to operate a compatible electric gate by entering a PIN code.
Keypads can be particularly useful for households, shared driveways, businesses and properties where multiple people require convenient gate operation.
Our gate keypad services include:
New keypad installation: Supply and installation of suitable outdoor keypads for automatic sliding and swing gates.
Wireless gate keypads: Installation of compatible wireless keypads where running control cables may be impractical.
Wired gate keypads: Installation and configuration of compatible hardwired keypad systems.
Keypad replacement: Replacement of damaged, outdated or unreliable gate keypads.
PIN programming: Setting up, changing or deleting keypad access codes.
Multiple-user PIN codes: Configuration of individual user PINs where supported by the selected keypad.
Keypad troubleshooting: Diagnosis of keypad faults, battery problems, wiring issues and communication failures.
Gate control integration: Connecting compatible keypads to the existing gate receiver or electronic control board.
We assess the existing gate motor and control system before recommending a keypad.
We install both wireless and hardwired keypad systems for compatible automatic gates.
Wireless gate keypads communicate with a compatible receiver without requiring a control cable between the keypad and receiver.
Depending on the model, they may operate using replaceable batteries or another suitable power arrangement.
Wireless systems can be practical for existing automatic gates where installing new cables would be difficult or expensive.
Compatibility, communication range, interference and battery maintenance must be considered.
Wired keypads connect to a compatible gate control system through suitable cabling.
Depending on the equipment, they may provide a convenient option for properties requiring a permanent keypad installation.
We assess available power, electrical connections, control board inputs and site conditions before installation.
Some automatic gate keypads allow multiple individual PIN codes to be programmed.
This can be particularly useful for households, commercial properties and shared entrances where different people require gate access.
Depending on the keypad model, available features may include:
Individual PIN codes for different users.
Adding and deleting user codes.
Changing an existing PIN.
Separate operating functions for compatible gate systems.
Temporary or restricted-use codes on supported models.
Not every keypad supports these functions. We can recommend a suitable model based on your requirements and configure the available features.
A gate pushbutton allows a compatible automatic gate to be operated by pressing a physical button.
Pushbuttons can be installed at suitable locations such as inside a property, near a driveway entrance or in a designated operating area.
Our services include:
Wired gate pushbuttons: Installation of suitable buttons connected to compatible gate controller inputs.
Wireless pushbuttons: Installation of compatible wireless buttons and receivers.
Push-to-open buttons: Configuring suitable gate systems to respond to a button press.
Gate exit buttons: Installing appropriately positioned buttons for convenient operation from within a property.
Replacement pushbuttons: Replacing damaged, unreliable or weather-affected switches.
Control board programming: Configuring the button's intended operating function where supported.
Pushbutton behaviour depends on the control board and its configuration. Some systems allow separate open, close, pedestrian or step-by-step functions.
We assess the system before selecting and configuring the appropriate equipment.
Outdoor keypads and pushbuttons must be suitable for the conditions in which they are installed.
We can recommend equipment with appropriate environmental protection for exposed installations, taking into account rain, sunlight, temperature and mounting location.
The required protection rating depends on the specific device and its installation environment.
We also consider mounting height, accessibility, wiring protection and the safe positioning of manual controls.
A gate keypad or pushbutton that stops working does not always need complete replacement.
We diagnose common faults including:
Gate not responding to the keypad.
PIN codes no longer operating correctly.
Wireless keypad battery or receiver problems.
Damaged or sticking pushbuttons.
Water damage and deteriorated connections.
Faulty keypad wiring or power supplies.
Programming and configuration problems.
Control board input faults.
Where repair is practical, we aim to restore the existing equipment. We can also supply compatible replacement keypads and pushbuttons when required.
We work with gate control systems from manufacturers including BFT, Centsys, FAAC, DEA, Nice, APC, Beninca, Merlin and Elsema.
We can install suitable compatible gate keypads, wireless receivers and pushbutton systems on many existing sliding and swing gate installations.
Compatibility depends on the specific controller, receiver, operating voltage and required gate functions.
Our keypad and pushbutton installations are suitable for a range of residential and commercial gate applications.
Residential customers may want a convenient keypad for family members or a pushbutton for operating a driveway gate from inside the property.
Commercial customers may require compatible multi-user keypads, durable outdoor buttons or replacement controls for frequently used automatic gates.
We help select equipment suited to the property's operating requirements.
Gate keypads and pushbuttons must be installed and configured so they do not introduce unnecessary operating risks.
We consider button positioning, the gate's movement, existing safety devices and control board operating functions.
Where required, additional safeguards or suitable control arrangements must be considered.
We test the operation of the installed equipment and relevant gate safety functions before returning the system to service.
Based in Melbourne's south-east, Swift Gate and Garage Door Services installs and repairs automatic gate keypads and pushbuttons throughout metropolitan Melbourne and the Mornington Peninsula.
South-eastern Melbourne: Dandenong, Endeavour Hills, Keysborough, Narre Warren, Berwick, Officer, Cranbourne, Pakenham, Glen Waverley and Frankston.
Eastern Melbourne: Ringwood, Doncaster, Kew, Templestowe, Croydon, Lilydale, Mooroolbark, Chirnside Park, Emerald and Tecoma.
Bayside Melbourne: Brighton, Black Rock, Sandringham, Mordialloc, Chelsea and St Kilda.
Mornington Peninsula: Mornington, Mount Eliza, Mount Martha, Rye and surrounding areas.
We also attend other metropolitan Melbourne suburbs for gate automation installation, troubleshooting and repairs.
Need a new automatic gate keypad, wireless keypad or push-to-open button installed?
Swift Gate and Garage Door Services provides professional gate keypad installation, PIN programming, pushbutton installation, repairs and replacement services.
**Call 0450 624 750 to discuss your requirements or request a quote
We supply, install and program compatible wired and wireless keypads for residential and commercial automatic sliding and swing gates.
We install and configure compatible gate keypads with individual user PINs, including adding, changing and removing codes where supported.
We install wired and wireless push-to-open buttons, gate exit buttons and compatible control switches for convenient gate operation.
We troubleshoot faulty keypads, damaged pushbuttons, receiver problems and control wiring across metropolitan Melbourne and the Mornington Peninsula.
Please wait, submitting your request...
